NEW! EOps NOISEZERO WG+
Wireless HD Audio SunGlasses
How to setup pairing? (with phone#1)
Quick start: Easy setup pairing (for Phone#1)
(1) Full Recharge
(2) Just unfold Right side frame to auto start PAIR mode (Hear “Power On”, Right frame LED indicator flashes Red/Blue)
(3) Phone #1 TURN ON bluetooth. Phone #1 Bluetooth menu, select “NOISEZERO WG+” to pair (hear “Connected”)
How to recharge?
• Battery: 100mAh each
• About 1 Hr 30 min FULL charged = max up to 5 Hours playtime
• Recharge daily. Use dry cloth to dry before charget.
• MUST recharge with 5V1A USB Charger.
• MUST NOT use Fast Charging.
• After recharge, MUST disconnect from USB
How to enable iOS Voice Isolation Mic Mode for voice call?
How to setup Multipoint pairing (with phone#1 and phone#2)
(1) After pairing completed for Phone#1, TURN OFF bluetooth of Phone #1
(2) Fold the glasses to power off now
(3) Unfold Right side frame to auto start PAIR mode (Hear “Power On”, Right frame LED indicator flashes Red/Blue)
(4) Phone #2 Turn on bluetooth. Phone #2 Bluetooth menu, select “NOISEZERO WG+” to pair (hear “Connected”)
(5) After pairing completed for Phone #2, Phone #1 TURN ON bluetooth again, Phone #1 Bluetooth menu, select “NOISEZERO WG+” menu to connect (hear “Connected”)
NOTE: After setup, next time use they should auto-reconnect. But if takes long time, then go to both phones’ bluetooth menu and click “NOISEERO WG+” to reconnect
How to control?
Single hand control (right side) Press sensor button:
[Incoming Call, 1 X PRESS] Pickup CALL
[Incoming Call, Hold 2 SEC] Reject CALL
[During Call, 1 X PRESS] End CALL
[During Music, 1 X PRESS] Play / Pause Song
[Voice Assistant, Hold 2 SEC] SIRI / Google
How to clean?
Use Microfiber lens cleaning cloth (not included)
MUST NOT use alcohol wipes to clean the lens as lens coating might be damaged.