NEW   EOps NOISEZERO WX2+

           HiFi DAC/AMP HD Bluetooth® MMCX cable with aptX HD [for Smartphones]

1/7

KEY FEATURES:

Qualcomm CSR 8675 chipset, Bluetooth 5.0

• AKM4376A chipset 

  32 bit/384kHz HiFi DAC Headphone AMP

Wireless HD Audio:

   aptX-HD, apt-X, aptX Low Latency

   (backward compatible with other codecs)

   Advanced Audio technology

• Audio Video Lip-sync

• Enhanced Stability Antenna 3.0

• Proprietary EOps IEM Connector Stabilizers    

  (double locking mechanism tightens    

  cable plug to IEM socket interface) 

• Qualcomm CVC Street & Wind

  Noise Reduction Digital MEMS Microphone

• 8 Hours continuous playback time*

• IPX5 LIQUIPEL 2.0 nano coating waterproof

• 14g Super Lightweight

• AI Voice Assistant Remote Assess: 

  Compatible: SIRI / Google Assistant

• Multipoint connection (support 2 phones)

• Bluetooth version: 5.0

HSP, HFP, A2DP, AVRCP, APTX HD (Backward compatible other codecs)

 

Wireless Functions with your mobile phone:

• Handsfree Call 

• Voice Prompt Alert

• Wireless Stereo Music Playback & Control: 

  • VOLUME +/-

  • PLAY/PAUSE, 

  • SONG << / >>

• RANGE: Up to10M *

control-04.png

• Enhance Voice Call Clarity Suppress Ambient Noise

(suppress nearby vehicle noise, wind noise)

 

TIPS: In crowded places, need to pull the microphone near mouth to speak to avoid picking up nearby other people’s voice

RECHARGE TIME:

• about 1.5 to 2 hours *

HANDSFREE TALK TIME: 

• Up to 8 hours *

MUSIC PLAYBACK TIME:

• Up to 8 hours * (average volume)

Water resistant to sweat / rain / splash  

(but you can’t wear it to swim. Don’t submerge it in water)

• 2 x Tap Mic Remote’s Play button to acess then speak to your phone’s AI Assistant (Siri, Google Now/Assistant required) without need to touch phone

IN THE BOX

• 1 X NOISEZERO WX2+ Bluetooth Cable

• 1 X Micro USB Charging Cable

• IEM Connector Stabilizers (includes 6 pcs customized silicone stabilisers sleeves. stack 2 pcs together for Left connector, stack 2 pcs together for Right connector, spare 2 pcs)

Note: In-ear Monitor earphones NOT included with this prouct / Warning: Avoid hearing damage. Do not use the Bluetooth Cable and In-ear Monitors at excessively loud levels as permanent hearing loss may occur. Please set volume to a safe level. / Warning: The Bluetooth Cable and In-ear Monitors exclude most externl sounds. Do NOT wear both left and right Montor earbuds together while driving, operating a motorized vehicle, machine, bicycling or crossing the road as you may not be alerted to potential danger. Please first check and observe local laws regarding the use of wireless handsfree earphones and mobile phone while driving to clarify if your local laws allow wearing one side Monitor earbud as wireless handsfree for driving or not. /  # Warning: The Bluetooth Cable is designed for resistant against water splash, sweat, rain. Do not submerge it in water or other liquid. You cannot go swimming with the Bluetooth Cable and In-ear Monitor. /  * Note: Wireless earphones performance, wireless range and talk, playback time are rough estimate only. Actual performance will vary depending but not limited to device type and settings, features being used, volume levels, temperature, humidity, storage, battery condition and whether there are nearby electro-magnetic interference source that affects wireless transmission. /   Warning: EOps Technology shall not be responsible for any mishandling or improper use of the earphones. Never attempt your own maintenance. All self inflicted damage and normal wear and tear parts are not included in warranty. 

/  EOps Technology Limited disclaims any propriety interests in the trademarks and names of others.

/ Product images on pack box and user guide are illustrations only. /Made in China.

How to install IEM connector stabilizer

How to setup pairing with 2 phones

Download PDF User manual:

1/1

WARNING - MUST USE CORRECT USB CHARGER:

MUST use USB 5V 1A Charger (e.g. iPod / iPhone 5V 1A charger). 

MUST NOT use computer USB port (5V 500mA) which might under charge. MUST NOT use USB 5V > 1A Charger / Quick Charge (QC) / Fast Charge / Large Current Charge / iPad Charger because it might damage the product, shorten battery life and playtime which will not be covered by warranty.

WARNING - COMPATIBILITY ISSUE:

NOT compatible with Fostex TE04 earphones

For 2-pin IEM earbuds (such as Westone 4R, UE Triple Fi v10), sorry, our bluetooth cable cannot naturally fit. Nevertheless, if you don't mind the trouble we know there exists 2-pin to MMCX adaptor which you can find on eBay.  Note: this is info sharing purpose only, as this adaptor is not our product.

For Audio Technica earphones with A2DC sockets (such as IM01/02/03/50/70, LS50/70), sorry, our bluetooth cable cannot naturally fit. Nevertheless, if you don't mind the trouble we know there exists A2DC to MMCX adaptor which you can find on eBay. Note: this is info sharing purpose only, as this adaptor is not our product.

WARNING - CORRECT USE OF MMCX CONNECTOR AND THE CORRECT USE OF SECURE FIT EARHOOK:

When you use this product, please make sure you are wearing it correctly with the SecureFit earhooks TIGHTLY around your ears. Also make sure the ear-tips of your IEM earbuds are securely and fully inserted in your ear canal. The purpose is not to allow any movement between the cable's MMCX plug and the IEM's MMCX socket. Otherwise, if the MMCX socket rotate or experience vibration, there could be intermittent noise due to bad contact (which can be solved by wearing the cable SecureFit earhook correctly). 

IEM Connector Stabilizer

• Each made up of 2 pieces silicone stablizer sleeves

FREQUENTLY ASKED QUESTIONS:

(1) IS THE BLUETOOTH STABLE? HOW TO IMPROVE BLUETOOTH RECEPTION WHEN GOT INTERFERENCE?

We actually tested it has very stable bluetooth reception. Nevertheless, at crowded area with too many other bluetooth devices around, there could be some interference as this is the nature of bluetooth. Also, it depends on the bluetooth quality of your phone (or music player with bluetooth).

 

SOLUTION:

In most situation, you should be able to improve reception by putting your phone (or music player with bluetooth) in the FRONT RIGHT SIDE POCKET (same side as the mic controller of our cable where our bluetooth antenna is located), then try DIFFERENT PHONE ORIENTATIONS (TOP FRONT / BOTTOM FRONT/TOP BACK / BOTTOM BACK) to max signal

Do not connect your phone to external power bank which might generate interference.

Also, please TURN OFF Wi-Fi and GPS if possible. 

In addition, please double check that you are correctly wearing the SecureFit earhook around your ears and do not allow any vibration/rotation in the MMCX socket. Otherwise, you might cause noise from bad contact and misunderstand that as poor reception (which can be solved by wearing it correctly).

RECEIVE-08.png

(2) Can I connect NOISEZERO WX2+ with

2 mobile phones?

Yes, but carry them wider apart to avoid interference (example, one phone in each front side pocket)

How to setup?

Phone 1: 

 

1. Turn on Phone 1 bluetooth.

 

2. Follow NOISEZERO WX2+ normal pairing steps to pair with Phone 1.

 

3. After pairing with Phone 1 done, turn off NOISEZERO WX2+.

 

4. Turn off Phone 1 bluetooth.

 

Phone 2:

 

5. Turn on Phone 2 bluetooth.

 

6. Follow NOISEZERO WX2+ normal pairing steps to pair with Phone 2.

 

7. After pairing with Phone 2 done, now turn Phone 1 

bluetooth also back on, and on Phone 1 manual select 

NOISEZERO WX2+ to connect. Now NOISEZERO WX2+ should be connected to both Phone1 and Phone 2 at the same time

PEOPLE-01.png

USAGE INFO:

 

TO RECEIVE A CALL: 

When you have incoming call to Phone 1 or Phone 2, press the NOISEZERO WX2+ ‘s multi-function button to automatically switch to receive a call from the respective phone.

 

MUSIC CONTROL: 

The music remote control functions on the mic housing would only work with one phone at a time. 

When you pressed PLAY music from Phone 1, NOISEZERO WX2+ ‘s music remote control functions would be activated to control Phone 1 ’s music player. 

And when you pressed PLAY music from Phone 2 ‘s music player, NOISEZERO WX2+ ’s music remote control function would be activated to control Phone 2 ‘s music player.

 

AI VOICE ASSISTANT CONTROL: 

NOISEZERO WX2+ ’s  AI Voice Assistant control button would control Phone 2 ‘s Voice Assistant only

(3) CAN I USE IT FOR JOGGING?

Yes, we actually tested our Bluetooth MMCX cable for jogging. Also, it is  IPX5 sweat and splash proof (NOTE: but cannot submerge in water). Please fix the  SecureFit ear hook more tightly around your ears and also put the rear battery case at the behind your neck location and then underneath your shirt as this should improve wearing stability. NOTE: Please also make sure your IEM is sweat proof before you use it for jogging.

(4) When I wear the cable, how come the mic goes to almost the rear of my neck? Is the cable too short? And during phone calls, it cannot properly pickup my voice at noisy places. How to solve this?

No worries. The length of our cable is similar to normal bluetooth headsets. Please double check if you are wearing it the correct way as we tested it to work ok with a 6 feet tall guy. The position of the mic should be on the right side, somewhere below the right ear (about 7-8cm). And during calls at noisy places, you should be able to pull the mic a bit closer to  your mouth so that it can pickup your voice better.

Copyright 2017-2019, EOps Technology Limited, all rights reserved. EOps and NOISEZEZRO are registered trademark in the U.S.A. and other countries.